|Payment & Shipping Terms||Supply Capacity|
|Unit Price:||16.69 USD||Production Capacity:||1000/week|
|Payment Terms:||T/T, WU||Delivery Date:||10- 30 days|
|Min. Order:||5 Piece/Pieces|
|Means of Transport:||Ocean, Air, Land|
CAC4010-03 Series Air Filter Combination (FR.L Combination):
FRL selection and use requirements
A. According to the pipe diameter, flow rate, pressure and filtration performance parameters and other technical systems require air assemblies
B. air filter has 2um, 5um, 10um, 20um, 40um, 70um, 100um seven kinds, according to the air quality requirements of the appropriate product.
C.using air regulator,try to avoid using the pressure range of the lower limit,by the use of pressure required to select a suitable air regulator.
D. Installation sequence: from the gas source inflow end start, attach the air filter,regulator,lubricator, the direction of the arrow on the housing element for the air flow direction can not be reversed
E. Air filters, lubricator must be mounted vertically with the cup side down and make access.
F. Once lubricator upstream, it will cause damage to internal parts and dangerous and should be avoided
G.Installation and connection, avoid the sealing tape, rust and other impurities inside the pipe
FRL use and maintenance
a. working medium to the use of clean and dry compressed air, and the air inside the pipe to prevent impurities into fully purge the system caused by the cylinder, valve malfunction, requiring lubrication piping systems in add lubricator is recommended to use lubrication oil is a transparent oil No. 1 (ISOVG32).
b. Normal system operation, to regularly check the air filter, lubricator work, and timely drainage (except automatic drain), refueling
c. Cylinder and valve when for long time not to use, pay attention to the minimum operating frequency of 1/30 days
d. Always check the operation of various pneumatic components, check the connection screws loose? Components for damage seal leakage phenomenon? Identify problems and timely treatment
e. Maintenance, be sure to turn off gas supply in advance, and the compressed air piping system maintenance operations can be carried out after emptying to prevent accidents
f. Component overhaul complete reassembly parts must be cleaned, and other impurities can not be brought within the system
Category: Air filter combination